- HP-DS-P106 Push-on Terminal
- 2017-12-24 16:46
- ■ Application: HP-DS-P106 the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and corrosion. Half part non shrink plug-in terminal providing strain relief and against vibration in rugged environments, whic
- HP-HWT Heavy Wall Shrink Tubing
- 2017-12-22 19:17
- ■ Application: It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.
- HP-KY(175) PVDF Shrink Tubing (Kynar)
- 2017-12-14 22:10
- ■ Application: HP-KY(175) is clear, thin-wall, semi-rigid, flame-retardant heat-shrinkable tubing with both high temperature and chemical resistance. Especially suitable for applications requiring high temperature performance, outstanding abrasion resista
- HP-SST-205 Shrink Soldersleeve
- 2017-12-09 21:50
- ■ Our heat shrink solder sleeve（Non-RoHS) is two piece design, with one solder ring,two different color glue ring,the solder in this kind of product is soft and better product performance.Soldersleeve provides insulation and lower the installed cost.We ke
- HP-MWTA(FR) Medium wall shrink Tubing with Flame retardant glue
- 2017-11-28 11:18
- ■ Application: It is designed especially ideal for outdoor electrical equipment and connections in wet and underground environments such as marine vessels, off-shore oil platforms, shipyard and harbor applications. 3:1 shrink ratio allows it easily fit ov
- HP-MP-I Shrink Moulded Parts I Type
- 2017-11-27 17:01
- ■ Application: The heat shrinkable moulded sleeve mainly used in electrical cable terminal connection,the excellent properties of stress release, sealing and mechanical protection can provide excellent protection of cable terminal connection,cable bifurca
- HP-SST-100 Shrink Soldersleeve
- 2017-11-09 16:11
- Our heat shrink solder sleeve（RoHS) is one piece design, PE shrink tubing,with one solder ring,two same color glue ring,the solder in this kind of product is RoHS required.Soldersleeve provides insulation and lower the installed cost.We keep this product
- HP-HST(Viton) Viton Shrink Tubing
- 2017-11-09 14:10
- ■ Application: HP-HST(Viton) is high temperature resistant, solvent-resistant heat shrink tubing. It is made of cross-linked fluoroelastomer compound with superior impact, abrasion and cut through resistance. With superior resistance to high and low tempe
- HP-Mylar Mylar Insulation Sleeve
- 2017-10-31 17:19
- ■ Application: Mostly used for welding point, contact, loop, transformer, motor, Electrical wire, electric heating component, capacitance, telephony relay etc. for temperature resistance and insulation, mechanism protection. ■ Characteristics： ●Color: Sle
- HP-HWTA Heavy wall Tubing with EVA glue
- 2017-10-16 14:08
- ■ Application: It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.
- HP-CGT(Al) Aluminum Foil Corrugated Tube
- 2017-10-08 10:01
- ■ Application: Aluminum Corrugated Tube is widely applied in the field of auto air-condition units, auto cables, power steering devices. We are able to design and produce customized heat protection hoses according to your requirements. ■ Characteristics：
- HP-DW General Purpose shrink Tubing with glue
- 2017-10-06 22:30
- ■ Application: Yellow/Green Heat Shrinkable tube is made from excellent yellow, green polyethylene material by special method. This products has excellences of soft, flammability, fast shrinking, bright color stand, stable performance. RoHS standard etc.
- HP-SST-D-103 High Temperature Shrink Soldersleeve
- 2017-09-22 14:59
- ■High Temperature Shrink Soldersleeve combined by high temperature PVDF shrinkable sleeve and preassembled earth conductor, the solder terminal is specially used for shielding and insulating high temperature electric wires and cables with tinplated or sil
- HP-MWTA(HR) Medium wall shrink Tubing with Heat resistant glue
- 2017-09-05 06:02
- ■ Application: It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. Especially for high temperature protection. 3:1 shrink ratio allows it easily fi
- HP-HST(TMS) Identification Shrink Tubing
- 2017-08-30 19:59
- ■ Application: Special designed to meet the requirements of high performance identification of wire and cable. ?It is made of superior flame retardant polyolefin with excellent electrical, physical, chemical and printing properties. ?Permanent printing pr
- HP-MP-L Shrink Moulded Parts L Type
- 2017-08-06 16:38
- ■ Application: The heat shrinkable moulded sleeve mainly used in electrical cable terminal connection,the excellent properties of stress release, sealing and mechanical protection can provide excellent protection of cable terminal connection,cable bifurca
- HP-ABox(DW)C-87 Shrink Dual Wall Tubing Color
- 2017-07-27 05:51
- ■ Application: HP-ABox(DW)B-87 is Assorted Plastic Box of HP-DW. It is customized minipacking, mainly for MRO (Mainterance Repairness Operation ) market. HP-DW is manufactured by co-extrusion of irradiated cross-linking polyolefin and hot-melt adhesive. T
- HP-SCIT Semi Conductive Insulation Tubing
- 2017-07-25 16:03
- ■ Application: Semi-conductive tube is used in Cable Joints upto 36 KV to provide insulation screen on the build-up insulation over connectors. The Semi Conductive Tubing is made from thermally stabilize cross linked semi-conductive Polymeric material. ■
- HP-EBS Expandable Braid Sleeve
- 2017-07-08 05:58
- ■ Application: HP-EBS expandable sleeve is flame-retardant and halogen-free. It offers durable abrasion resistance in a wide range of industrial applications. The open weave construction allows an easy installation on a bundle of hoses and cables, even if
